DIY Beaded Heart Necklace

For some reason, I have really been into beads lately.
I wanted to create a fun necklace with beads and patterns.
So I came up with a beaded heart necklace.
Its simple and adorable, though it does take some patience to make!

Here are all the supplies you will need:

I wrote out the pattern you can use to follow if you want to create the necklace exactly like mine
Otherwise, you can think up your own pattern, and just use mine as an example.
I actually started from the middle and worked my way out, to make sure everything was even.
But since Ive written the pattern for you, you wont have to worry about that.

So you will take one head pin at a time and just start adding the beads in the pattern given.
You will want to make sure each bead you add is about the same size.
Some are shorter or taller than the others, so either dont use those, or
change up the pattern a smidgen to work with those wonky sizes!

One you have all 13 of your head pins filled you will need your round nose pliers.
There will be some wire left on the top, bend it at a 90 degree angle, then curve it around your pliers.
Repeat this for all 13 head pins, then take the eye pin and loop them all through in order!

One they are all looped through, you will create a loop on the other end of the eye pin,
again with your round nose pliers.

Next you will use your flat nose pliers and jump rings, to attach the chain to the eye pin!
Cut the chain with your wire cutters.
Attach jump rings and the lobster clasp.

And there you have it.

An adorable beaded heart necklace to wear and enjoy!!

Much Love & Hugs,

This post sponsored by:

Sponsor an "In Post" Ad!  Click {here}for more info.